Code Blue’s WM-180 Public Address System (PAS) provides a wall mounted option for deploying remote amplified speakers to complement an existing or new mass notification system. The speaker array is constructed of the same vandal resistant ABS plastic utilized for the free-standing pedestal PAS models, and consists of a rugged steel enclosure for interior/exterior application.

Sound dispersion is 180° via three uniquely designed speaker portals each containing its own dedicated speaker. These tuned portals promote maximum audio clarity to accurately broadcast messages to your intended audience.

The WM-180 is available in two models: with or without an on-board interactive controller card. The controller board enables the WM-180 to be directly managed by Code Blue’s Blue Alert® mass notification software; granting the user unparalleled messaging options. The controller also monitors the amplifier and speaker for various failures and reports those to the appropriate maintenance personnel; conserves energy, shutting the system off when not in use; and allows the user to call a single WM-180 unit for a locale-targeted message.

Without the controller card, the WM-180 can be connected via audio and control cables to a nearby IA4100 or IP5000 speakerphone allowing similar control and monitoring capabilities. As a standalone amplified speaker array, the WM-180 becomes a 600 Ohm audio input amplifier without controls and is always live and ready to broadcast at a moments notice.

DOWNLOADS

• Product Cutsheet
• Technical Data
• A&E Specifications (MS Word)
• A&E Specifications (PDF)
• Turnkey Emergency, MNS and Business Communications Solutions
• Color Selector

SIMILAR PRODUCTS

• PAS 1-d
• PAS 1-e
• PAS 1-s
• PAS 2-e
• PAS 5

STANDARD FEATURES

• ToolVox® Communication Manager compatible with Blue Alert®, EMS and UPD software integration
• Proprietary One-Cycle Sound™ control w/ output feedback
• Internal and remote volume adjustment
• IA4100, IP5000 or no control options
• Synchronized switching frequencies
• FXS, IP or no analog controller
• Remote disable
  
• Monitoring features include signal clipping, output current and temperature
  
• Full over current, under voltage and over temperature protection

OPTIONAL FEATURES

• S-550 24v beacon/strobe area light
• Custom colors (for entire assembly)

PAS SPEAKER SPECIFICATIONS

• Frequency Response: 450Hz-7kHz
• Power Capacity: 210w continuous
• Impedance: 2.7 Ohms

PAS AMPLIFIER SPECIFICATIONS

• Frequency Response: 20Hz-20kHz
• Output Power: 400w
• Max Bridged Output Power: 500w
• Sensitivity: 3.5Vrms
• Signal-to-Noise: 117dB

FINISH COLOR OPTIONS

• Safety Blue
• Safety Red
• Safety Yellow
• Gloss White
• Gloss Black

• Midnight Blue
• Medium Bronze
• Dark Bronze
• Cardinal Red
• British Racing Green

CUSTOM COLORS OPTION

• Custom colors and graphics from Pantone color chart, RAL number or sample are available as a special order.