Specs
CODE BLUE 1-e
PRODUCT SPECIFICATION
Spec in RTF Format
1.0 GENERAL DESCRIPTION
1.1 The unit (Code Blue CB 1-e) shall be an easily identifiable, vandal resistant communications device that is Americans with Disabilities Act (ADA) compliant, multi-functional, freestanding, and constructed of heavy steel. The unit shall be aesthetically pleasing and virtually impervious to damage, and shall include a high quality, vandal resistant, hands-free communications device, a powerful strobe light, and a vivid blue beacon that serves to identify the unit from a great distance.
1.2 The communication system (Code Blue CB3100) shall be designed so that a single touch on the communications device button shall immediately and automatically dial a preprogrammed number. This shall simultaneously activate the blue strobe light and an optional peripheral device such as a remote preset for closed circuit television (CCTV). Immediately after establishing the phone connection with the receiving party, the communications device shall be capable of sending a signal identifying the specific unit being activated. The strobe shall continue to flash, drawing attention to this location until the receiving party terminates the call.
2.0 CONSTRUCTION
2.1 The unit shall be a concentric steel cylinder (bollard) with a 12.75 inch diameter, a .25 inch wall thickness, and a height of 9 feet.
2.2 Tamper resistant fasteners manufactured by the McGard Company shall be used. It shall not be possible to enter the unit or remove any component without a special computer designed bit-wrench designed for this purpose. These bit-wrenches are supplied only by the manufacturer of the unit. All other types of fasteners shall not be acceptable due to the abundance of non-proprietary tools available for their removal.
2.3 The unit shall have an internal anchor baseplate that is fully welded to the bollard two inches above its base. The base plate shall be fabricated with a minimum .50 inch thick A-36 grade steel plate, and shall have a 5 inch diameter center hole for electrical conduit access, as well as four oblong holes on an 8 inch circular bolt pattern for the anchor bolts. External mounting is not acceptable.
2.4 The unit shall have an access opening for anchor mounting and electrical wiring that is near the base of the bollard.
2.4.1 The opening shall have a cover plate flush with the unit, whose wall thickness and radius shall be the same as the bollard. The cover plate shall fit precisely into the opening, have a weather resistant gasket to prevent water from entering the unit, and shall be held in place by two 1/4-20 by 1 inch countersunk, tamper resistant, proprietary fasteners as supplied by the manufacturer.
2.5 A dome top assembly shall enclose the top of the bollard, and shall consist of a cover plate, a gasket, a blue strobe light, and a Lexan-type polycarbonate come cover with a passive vent.
2.5.1 The top cover plate shall be of high quality, high-density cast iron that that shall be free of defects. It shall have a diameter that equals the diameter of the bollard, and shall have three tabs each with 10-24 X 1 inch stainless steel thumbscrews to facilitate mounting the finished assembly to the bollard.
2.5.2 A cylindrical, transparent dome that is six inches tall with a 12.50-inch outer diameter shall cover the top of the cover plate. The dome shall be made of clear Lexan XL type polycarbonate, and shall be sloped so that water does not pool on top of the unit.
2.5.3 The dome shall be placed over the combination blue beacon and strobe light and shall fit over the concentric ring in the cover plate. It shall be attached to the cover plate by means of three 10-24 X 1 inch tamper resistant proprietary fasteners attached through the dome and into the three offset tabs in the cover plate. The space between the dome and cover plate ring shall have a bristle style gasket to allow passive venting while minimizing entrance of insect and moisture.
2.6 A second opening shall be cut into the face of the unit at a point beginning 38.5 inches above the bottom of the bollard. The opening shall be 14.5 inches high at the forward edge, and 12.25 inches high at the rear edge. The lower edge of the opening shall be sloped from the rear to the front at an angle 35 degrees from the horizontal. The upper horizontal edge of the opening shall constitute an arc of 160 degrees in the face of the unit, and the sides of the opening shall be parallel and the same length.
2.6.1 The opening shall be totally enclosed by a 7 gauge steel plate that shall have an opening to allow for a communications device. The plate shall be seal welded to the bollard so that the faceplate and the bollard appear to be one unit.
3.0 MOUNTING
The freestanding unit shall be mounted onto four bolts that are set in concrete. Standard 3/4 x 24 inch galvanized anchor bolts with galvanized nuts and washers shall be used as supplied. Unit shall mount one-half inch above the concrete to allow air movement.
4.0 ELECTRICAL
4.1 All electrical components shall have quick-disconnect terminals for easy service or removal. All wiring shall be concealed within the bollard and shall not be visible from the outside of the unit.
4.2 The unit shall require 24 VAC and draw a maximum of 2.5 amperes under normal operation. The entire unit shall be surge protected.
4.3 The speakerphone shall require 20 mA loop current at the unit. A 22 to 26 AWG shielded twisted pair cable shall be used. Longer cable runs shall require the heavier gauge cable.
5.0 LIGHTS
5.1 Combination blue strobe and beacon: The unit shall have a combination lighting unit consisting of both a strobe and a beacon. The strobe shall generate approximately 1,000,000 candlepower, and have a flash rate of no less than 60 flashes per minute. The beacon shall always be illuminated. A deep blue polycarbonate prismatic refractor that distributes the light in a horizontal pattern, making the flash bright and visible even at great distances, shall cover the strobe. The light shall be located above the bollard.
5.2 The strobe light shall be automatically activated when the “PUSH FOR HELP” button on the communications device is touched, and shall continue to flash until the answering party deactivates the unit. The strobe cannot be turned off at the unit itself.
5.3 Faceplate light: A long life, LED light fixture shall be concealed within the unit above and directly forward of the communications device. This fixture will direct light onto the communications device faceplate, and shall be vandal resistant.
6.0 COMMUNICATIONS
6.1 The unit shall have a high quality, vandal resistant and ADA compliant speakerphone communications device.
6.2 Standard Speakerphone: (Code Blue CB3100s)
The speakerphone shall be Code Blue CB3100s and have one 1.5 inch piezoelectric button labeled “PUSH FOR HELP,” one 3/8 inch diameter red light emitting diode (LED) labeled “Call Placed,” and one 3/8 inch diameter green LED labeled “Call Received.” The speakerphone shall have an internally mounted electronics enclosure, auxiliary power, and shall be capable of playing up to two digitally stored voice messages upon activation. The electronics enclosure shall be capable of using interchangeable faceplates: a single-button faceplate, a two-button faceplate, or a two-button faceplate with keypad. The speakerphone shall be programmable from a remote location and have a three number dialing capability per button. Battery backup shall be rated for 16 hours of active talk time and 32 hours of standby. Line powered phone devices, DIP switch programming, and push-to-talk devices are not acceptable.
6.3 The CB3100 speakerphone shall have the following standard features:
• Three number dialing capability up to 16 digits per button.
• Remotely programmable.
• Remote electronics mounting (extendable up to 5’ with optional 3’ ribbon extension).
• Three reporting inputs (aux one input has optional activation).
• Two output relays (optional aux 2 salvable to aux 1).
• Remote control speaker volume adjustment.
• Silent monitoring mode, password protected.
• Remote control two step microphone sensitivity adjustment.
• Programmable passwords.
• Programmable conversation time.
• Allows the black button on a keypad phone to act simply as a hook switch or as a speed dial button before allowing keypad use (for auto dialing into automated systems).
• Detects inaudible hang-up commands from the phone system to allow the CB3100 to detect more accurately when the operator has disconnected from the call.
• Allows for the lockout of “during call commands.”
• Internal watchdog timer to detect and restart the micro controller after a lock up.
• Supports the RPD diagnostic routine that tests the integrity of the microphone and speaker when used with the FP series faceplates.
• RS485 data jack to allow a RS485 device to activate the phone.
• Programming option to set the number of times voice message(s) are played.
• Capable of using interchangeable faceplates-single button, dual button and dual button with keypad.
• Re-playable message(s) on demand.
• Output sound level >80 dB at 1 meter for normal conversation.
• Waterproof 3.5-inch speaker.
• Waterproof microphone.
• Operating temperatures of -40°F to +150°F (-40° to +65°C).
• Conformal coated speakerphone electronics to withstand harsh environments.
• Capable of playing messages simultaneously at the unit and to the call center.
• EEPROM Memory ensures that programming is retained during power loss.
• Capable of notification when AC power has been off for 15 minutes.
• Auxiliary power supply, battery back up – 16 hours active talk time, 32 hours standby time.
• Highly flexible two stored voice identifiers – includes four modes of operation.
• Easily integrate with CCTV, alarm systems and other security equipment.
• Compatible with 4+1 Express and 4+2 Express Formats.
• Optional AMPS cellular transceiver.
• Optional 2.4 GHz transceiver.
• Complies with FCC Part 15 and TIA/EIA/IS-968.
7.0 FINISH
7.1 The unit shall be finished with a coating process known to be highly graffiti resistant and UV resistant.
7.2 Substrate preparation shall be as required to comply with applicable ASTM impact and adhesion standards.
• D2794 Direct and Reverse Impact
• D523 Gloss @ 60 degrees
• D3359B Cross Hatch Adhesion
• B117 Salt Spray Resistance
7.3 The polyurethane finish shall be a multicoat system available in 10 standard colors and custom colors as specified by the user and approved by the manufacturer.
7.4 The primer coat and finish coat shall each have a minimum coverage thickness of 2.0 mils.
7.5 Other types of protective finishes are not acceptable.
8.0 GRAPHICS
8.1 The graphics shall be a durable engineering grade reflective vinyl for high visibility and legibility.
8.2 The standard graphics text shall be “Emergency,” “Assistance,” “Security” or “Courtesy,” and shall be available in 30 inch lengths. Standard colors shall be “reflective white,” “reflective blue,” and “reflective black.”
9.0 OPTIONS
9.1 An optional two-button version (Model CB3100-d) or a keypad version of the phone (Model CB3100-k) shall be available.
9.1.1 The two-button version (CB3100-d) features shall be as follows:
• There shall be a button labeled “Push for Help.” This button when touched will automatically activate the strobe and place a call.
• There shall be a button labeled “Info.” This button when activated shall automatically place a phone call to the pre-programmed number(s).
9.1.2 The keypad option (Model CB3100-k) features shall be as follows:
• There shall be a button labeled “Push for Help.” This button when touched will automatically activate the strobe and place a call.
• There shall be a button labeled “Call.” This button shall open the phone line for calls to be made from the keypad.
9.2 There shall be an option of customized paint colors and graphics. Colors other than standard shall be available based on RAL number specified by the user and approved by the manufacturer.
9.3 The unit shall be capable of accepting an integrated overhead camera mount that accepts a 1½ NPT dome camera supplied by others. The overhead camera mount shall be designed to be available and ordered with the CB I unit or as a retrofit to installed CB I units.
10.0 APPROVALS
The unit in its standard configuration shall be certified by a recognized third party testing organization to conform to UL 60950-1/CSAC22.2 No. 60950-1-3.
11.0 WARRANTY
The unit shall be warranted for a period of two years. Reference manufacturers warranty for further details.
12.0 MANUFACTURER
12.1 The Manufacturer shall be Code Blue Corporation of Holland, Michigan. There are no known equivalents.
12.2 Code Blue Corporation manufactures its products according to the most recent revision of product specifications, and shall not be held responsible for obsolete or outdated specifications. For the latest revision, please refer to www.codeblue.com.
|
