Specs
CODE BLUE 2-e
PRODUCT SPECIFICATION
Spec in RTF Format
1.0 GENERAL DESCRIPTION
1.1 The unit (Code Blue CB 2-e) shall be an easily identifiable, vandal resistant communications device that is Americans with Disabilities Act (ADA) compliant, multi-functional, wall mounted, and constructed of heavy stainless steel. The unit shall be aesthetically pleasing and virtually impervious to damage, and shall include a high quality, vandal resistant, hands-free communications device, and a powerful combination blue beacon and strobe that serve to identify the unit from a great distance.
1.2 The communication system (Code Blue CB3100) shall be designed so that a single touch on the communications device button shall immediately and automatically dial a preprogrammed number. This shall simultaneously activate the blue strobe and an optional peripheral device such as a remote preset for closed circuit television (CCTV). Immediately after establishing the phone connection with the receiving party, the communications device shall be capable of sending a signal identifying the specific unit being activated. The strobe shall continue to flash, drawing attention to this location until the receiving party terminates the call.
2.0 CONSTRUCTION
2.1 The housing front shall be fabricated from 12-gauge, stainless steel that is brushed to a number 4B finish after fabrication, and shall be 32 inches high, 11.9 inches wide, and 7.6 inches deep. There shall be a back plate fabricated of 12 gauge stainless steel that shall be welded to the housing front.
2.2 Tamper resistant fasteners manufactured by the McGard Company shall be used. It shall not be possible to enter the unit or remove any component without a special computer designed bit-wrench designed for this purpose. These bit-wrenches are supplied only by the manufacturer of the unit. All other types of fasteners shall not be acceptable due to the abundance of non-proprietary tools available for their removal.
2.3 All openings in the housing shall be laser, plasma or water jet cut to provide clean, straight, defect-free edges with no stains or discoloration from cutting or welding.
2.4 There shall be a top cap fabricated of 12 gauge, stainless steel that is brushed to a number 4B finish after fabrication, and shall house the light assembly consisting of a combination blue beacon and strobe. This top cap light assembly is attached with four each 10-24 by ¾ inch stainless steel, tamper resistant, proprietary fasteners supplied by the manufacturer. This assembly shall be removable for servicing.
2.5 There shall be a lens opening cut into the face of the housing that shall be 7 inches high and 11.75 inches wide. The opening shall begin approximately 2 3/8 inches from the top of the unit. The corners of the cuts shall be uniformly rounded, while the edges of the cuts shall be straight and free of burrs or other visual imperfections. The four edges of each opening shall form a square when viewed in elevation from the front of the unit.
2.6 A .187 inch thick transparent lens formed of a single sheet of clear, Lexan XL type polycarbonate shall be inserted into the housing behind the lens opening and chemically fastened to the housing interior. The lens shall be completely sealed with silicon around the lens opening, both inside and out, which will render it water, insect, and vandal resistant. The lens shall be treated so that it will be virtually impervious to damage from ultra-violet radiation, aging, cracking, yellowing or breaking.
2.7 The entire unit shall be weather and insect resistant when fully assembled.
3.0 MOUNTING
The unit shall attach to the wall through the back of the housing by using four each 3/8 inch by 3 inch masonry type anchors that are included with the unit. The anchors shall be located internally, and shall be accessible only by removing the top cap.
4.0 ELECTRICAL
4.1 All electrical components shall have quick-disconnect terminals for easy service or removal. All wiring shall be concealed within the enclosure and shall not be visible from the outside of the unit.
4.2 The unit shall require 24 VAC and draw a maximum of 2.5 amperes under normal operation. The entire unit shall be surge protected.
4.3 The speakerphone shall require 20 mA loop current at the unit. A 22 to 26 AWG shielded twisted pair cable shall be used. Longer cable runs shall require the heavier gauge cable.
5.0 LIGHTS
5.1 Combination blue strobe and beacon The unit shall have a combination lighting unit consisting of both a strobe and a beacon. The strobe light shall generate approximately 1,000,000 candlepower, and have a flash rate of no less than 60 flashes per minute. The beacon shall always be illuminated. A deep blue polycarbonate prismatic refractor that distributes the light in a horizontal pattern, making the flash bright and visible even at great distances, shall cover the strobe. The light shall be situated within the housing, inaccessible to vandals and weather resistant.
5.2 The strobe shall be automatically activated when the “PUSH FOR HELP” button on the communications device is touched, and shall flash until the receiving party deactivates the unit. The strobe cannot be turned off at the unit itself.
5.3 The light shall be mounted onto a heavy gauge steel module that is only accessible by removing the top of the unit.
6.0 COMMUNICATIONS
6.1 The unit shall have a high quality, vandal resistant and ADA compliant speakerphone communications device.
6.2 Standard Speakerphone (Code Blue CB3100S)
The speakerphone shall be Code Blue CB3100 and have one 1.5 inch piezoelectric button labeled “PUSH FOR HELP,” one 3/8 inch diameter red light emitting diode (LED) labeled “Call Placed,” and one 3/8 inch diameter green LED labeled “Call Received.” The speakerphone shall have an internally mounted electronics enclosure, auxiliary power, and shall be capable of playing up to two digitally stored voice messages upon activation. The electronics enclosure shall be capable of using interchangeable faceplates: a single-button faceplate, a two-button faceplate, or a two-button faceplate with keypad. The speakerphone shall be programmable from a remote location and have a three number dialing capability per button. Battery backup shall be rated for 16 hours of active talk time and 32 hours of standby. Line powered phone devices, DIP switch programming, and push-to-talk devices are not acceptable.
6.3 The CB3100 speakerphone shall have the following standard features:
• Three number dialing capability up to 16 digits per button.
• Remotely programmable.
• Remote electronics mounting (extendable up to 5’ with optional 3’ ribbon extension).
• Three reporting inputs (aux one input has optional activation).
• Two output relays (optional aux 2 salvable to aux 1).
• Remote control speaker volume adjustment.
• Silent monitoring mode, password protected.
• Remote control two step microphone sensitivity adjustment
• Programmable passwords.
• Programmable conversation time.
• Allows the black button on a keypad phone to act simply as a hook switch or as a speed dial button before allowing keypad use (for auto dialing into automated systems).
• Detects inaudible hang-up commands from the phone system to allow the CB3100 to detect more accurately when the operator has disconnected from the call.
• Allows for the lockout of “during call commands.”
• Internal watchdog timer to detect and restart the micro controller after a lock up.
• Supports the RPD diagnostic routine that tests the integrity of the microphone and speaker when used with the FP series faceplates.
• RS485 data jack to allow a RS485 device to activate the phone.
• Programming option to set the number of times voice message(s) are played
• Capable of using interchangeable faceplates-single button, dual button and dual button with keypad.
• Re-playable message(s) on demand.
• Output sound level >80 dB at 1 meter for normal conversation.
• Waterproof 3.5-inch speaker.
• Waterproof microphone.
• Operating temperatures of -40°F to +150°F (-40° to +65°C).
• Conformal coated speakerphone electronics to withstand harsh environments.
• Capable of playing messages simultaneously at the unit and to the call center.
• EEPROM Memory ensures that programming is retained during power loss.
• Capable of notification when AC power has been off for 15 minutes.
• Auxiliary power supply, battery back up-16 hours active talk time, 32 hours standby time.
• Highly flexible two stored voice identifiers - includes four modes of operation.
• Easily integrate with CCTV, alarm systems and other security equipment.
• Compatible with 4+1 Express and 4+2 Express Formats.
• Optional AMPS cellular transceiver.
• Optional 2.4 GHz transceiver.
• Complies with FCC Part 15 and TIA/EIA/IS-968.
7.0 FINISH
Stainless steel
7.1 The unit housing shall be fabricated of stainless steel, and shall be brushed to a number 4B finish after fabrication. The finish shall be uniform and free of visible defects.
Painted
7.2 The unit shall be finished with a coating process known to be highly graffiti resistant and UV resistant.
7.2.1 Substrate preparation shall be as required to comply with applicable ASTM impact and adhesion standards.
• D2794 Direct and Reverse Impact
• D523 Gloss @ 60 degrees
• D3359B Cross Hatch Adhesion
• B117 Salt Spray Resistance
7.2.2 The polyurethane finish shall be a multicoat system available in 10 standard colors and custom colors as specified by the user and approved by the manufacturer.
7.2.3 The primer coat and finish coat shall each have a minimum coverage thickness of 2.0 mils.
7.2.4 Other types of protective finishes are not acceptable.
8.0 GRAPHICS
8.1 The graphics shall be a durable engineering grade reflective vinyl for high visibility and legibility.
8.2 The standard graphics text shall be “Emergency,” “Assistance,” “Security” or “Courtesy,” and shall be available in 20 inch lengths. Standard colors shall be “reflective white”, “reflective blue” and “reflective black.”
9.0 OPTIONS
9.1 An optional two-button version (Model CB3100-d) or a keypad version of the phone (Model CB3100-k) shall be available.
9.1.1 The two-button version (CB3100-d) features shall be as follows:
• There shall be a button labeled “Push for Help.” This button when touched will automatically activate the strobe and place a call.
• There shall be a button labeled “Info.” This button when activated shall automatically place a phone call to the pre-programmed number(s).
9.1.2 The keypad option (Model CB3100-k) features shall be as follows:
• There shall be a button labeled “Push for Help.” This button when touched will automatically activate the strobe and place a call.
• There shall be a button labeled “Call.” This button shall open the phone line for calls to be made from the keypad.
9.2 There shall be an option of customized paint colors and graphics. Colors other than standard shall be available based on RAL number as specified by the user and approved by the manufacturer.
10.0 APPROVALS
The unit in its standard configuration shall be certified by a recognized third party testing organization to conform to UL 60950-1/CSAC22.2 No. 60950-1-3.
11.0 WARRANTY
The unit shall be warranted for a period of two years. Reference manufacturers warranty for further details.
12.0 MANUFACTURER
12.1 The Manufacturer shall be Code Blue Corporation of Holland, Michigan. There are no equivalents.
12.2 Code Blue Corporation manufactures its products according to the most recent revision of product specifications, and shall not be held responsible for obsolete or outdated specifications. For the latest revision, please refer to www.codeblue.com.
|
